Metal Fence Post – First, I want to show that I happen to have an additional fence panel that matches my current fence. If you don’t have extras, you should have no problem finding a panel to match the type of wood your fence. However, if your fence is built from a narrow type panel, say 1 in. X 4 in., you will want to buy 1 in wider. X 6 inches of panel so as to make sure the ugly metal fence post can be covered. A narrower panel will most likely not be able to attach the poles.
All you need to do is take 3 panels and make a 3-sided open box to cover the ugly metal fence post with. One of the most important is metal fence post. Place 3 panels on a flat utility table or flat surface. Place one of the flat panels (this will be the front side panel), and secure the other two to each side to form your open side box. Using a rifle screw or an electric drill with a screw at a lower speed, secure the 2-sided panel using a wooden screw that is long enough to secure the panel firmly.
11 Photos Gallery of: Metal Fence Post With Matching Extra Wood Panels
To secure your 3-sided wooden pole cover to the existing fence, you will want to use L-shaped metal brackets. These come in various sizes and can be found in home and garden shops. You can place a new polar cover made on top of an ugly metal fence post to fit it, and fasten your wooden cover to the existing fence, so cover your ugly metal fence post. I then decorated some of my new wooden cover with solar lights. That’s the importance metal fence post.
