Vinyl fence post – Vinyl is an ideal material for fences, as they do not become yellow, mold, putrefaction or decomposition. Vinyl is also resistant to painting, so while you cannot customize the color, you also do not have to worry about vandalism. Most vinyl fences come with prefabricated panels that will attach to the fence posts. These panels make the installation of the fence a bit easier, but it also means that the distance between the posts of the fence has to be exact in order for the panels to fit together.
Ideas for set up vinyl fence post. Place a stake on the ground where you want to place the first message. Tie one end of the rope to the stake and walk to the area where you want the next post. Some vinyl fences use panels that cannot be cut, so you need to position the posts accurately. Add the length of the panel, plus the width of the entrance, and ¼ of an inch for the hanger and screws. This will give you the total distance between the centers of each position.
12 Photos Gallery of: Set Up Vinyl Fence Posts Ideas
Then for set up vinyl fence posts. Continue to measure and paint the entire distance of the fence. Use additional stakes to hold the rope in the corner posts. Dig a hole wide and 30 inches deep to 12 inches with the whole digger. Make the bottom of the hole a little wider than the top so that the frost will not push the ground post. You may have to dig the bottom with your hand to make sure it is wider than the top.