Galvanized fence post – Although most fences are either all wood or all metal, using a mixture of the two materials has both design and functional features. The advantage of using galvanized metal posts to support the wooden slats or fencing panels is their resistance to rot and deformation. Metallic poles add to the robustness of the fence, while adding a modern look to its appearance. The process of establishing metal poles is similar to wooden poles; however, fixing wooden rails for messages requires special hardware and a few more minutes of your time.
Ideas for build a galvanized fence post. Hammer a stake into the ground at each end of the fence line. Bow tie around a bonfire, pull it taught and tie it around the other game. Measure along the line of the sting and hammer a stake into the ground every 8 feet to mark the location of the posts. Dig the post holes with a post-hole finder. Make each whole 2 feet deep and 10 to 12 inches in diameter. Pour the cement mixture into a wheelbarrow, add water and mix the cement according to the instructions in the bag. Each hole should contain half an 80 pound bag of cement.
12 Photos Gallery of: Ideas For Build A Galvanized Fence Post
Put a pole in the center of the first hole. Ask an assistant who holds the position while the cement shovels into the hole. Pack the cement with a piece of wood to eliminate any air bubbles. Check the message to plumb with a carpenter level. Then for build a galvanized fence post. Attach the three U-shaped metal fence post brackets to each post with 1-inch metal screws and a drill. Place the bottom bracket 8 inches above the ground, one 8 inches from the top and another evenly spaced between the two.