Pool safety fence – If your house has a swimming pool on the floor that is not fenced in, a small child can easily fall inside and drown. Avoiding this risk is as simple as installing a baby pool fence. These fences are quite easy to install and can save your child’s life, as well as the life of an animal companion. Sketch on the deck of your pool, staying about two or three feet from the edge of the pool, with a thick rope. This is where your fence will go.
Measure the length of the rope to decide how much pool safety fence you will need. Use a flexible tape measure like those used for sewing, so you do not have to move the thread out of place to measure it. Measure the distance between the fence posts of the fence you have just purchased. This is the distance between the drill holes you will be on your pool deck.
12 Photos Gallery of: How To Install Pool Safety Fence
Use a pencil to mark the place where a drill hole should be made along the cord. Make sure that the drill hole is only slightly larger than the size of the entrance pool safety fence so that the message fits securely. Keep in mind where you want the fence door to go when marking holes to drill. Drill the holes around the perimeter of the pool. The holes should be at least an inch deep. Brush the loose cement from the holes before proceeding. Begin inserting your fence posts into the holes you have drilled, pulling the fence taut as you go. Start with the part that is going to be your front door.